Refrigerated Centrifuge ORTOALRESA Digtor 22 R Refrigerated Centrifuge

We offer a wide selection of devices from the Spanish manufacturer "ORTOALRESA Alvarez Redondo SA", whose company is focused on continuous improvement of product and process efficiency, aiming to offer the best technological solutions to the medical, technical-scientific research and industrial sectors in general.

Categories:General laboratory equipment, Centrifuges, Laboratory equipment

Description
Additional information

"ORTOALRESA Alvarez Redondo SA" Consul 22 R refrigerated centrifuge

Our largest refrigerated benchtop centrifuge with maximum performance. The ergonomic design allows easy loading of the rotor and allows easy identification of the load balance. The device has a wide variety of accessories, allowing the use of 750 ml tubes, microplates, microtubes and many positions for the most popular tubes of use: 15 ml. conical, 50 ml. conical, 15 ml., 10 ml. and 5 ml. Its color TFT touch screen provides performance, allowing, in addition to controlling the equipment according to operating parameters, to export data for analysis and use for timer programming. The autonomy provided by this device allows the user to reduce working time, automating cycles and operating modes, ensuring process traceability. Its refrigeration system allows maintaining the minimum chamber temperature below 4 °C, regardless of the rotor type and the selected speed.
Features
- TFT color touch screen, visible from more than 3 m. away:
  - Displays revolutions per minute and relative centrifugal force (RPM/RCF), time, temperature, acceleration/deceleration (PCBS) and unbalance location system (ULS).
  - Speed programming in 10 RPM/10 xg steps.
  - Actual RCF values on display, depending on accessory configuration.
  - Counting up/down from “0” or “set RPM/RCF” for reproducible tests.
  - Timer from 1 sec. to 99 hours, programmable in 1 sec. increments and fixed position.
  - PCBS: Progressive controlled acceleration and braking ramp system up to 175, which prevents homogenization of samples after separation.
  - ULS: The Unlink Location System displays the bucket number that is causing the unlink shutdown.
  - Start delay: Allows you to set the cycle start time.
  - Linked Program: Allows you to link up to 8 consecutive programs without user intervention.
  - 100 programmable memories, password protected.
  - Several acoustic and visual messages indicate the device status to the user.
- Easy to use:
  - Microprocessor controlled. Connection.
  - Brushless, maintenance-free induction motor.
  - List of rotors and adapters in memory.
  - Noise level: below 60 dB.
  - Start, stop, open the lid and short spin time with adjustable speed buttons.
  - The speed can be blocked or modified during the cycle.
  - The last values remain in memory.
  - Automatic rotor recognition. High speed protection.
- Safety:
  - Cover with safety systems:
    - Automatic lid locking system, motorized with double lock.
    - Emergency lid opening system.
    - Locking and protection against opening during the entire work.
    - Lid fall protection.
    - Socket in the lid for calibration and operation check.
  - Disconnection detection and shutdown.
  - Protective ring between the centrifugation chamber and the housing.
  - Centrifugation chamber made of stainless steel (easy to clean).
  - Rotors can be removed with the lid closed. Hermel lids.
  - Rotors and adapters are autoclavable, easy to install by the user.
  - Automatic power off for up to 8 hours of energy saving.
- Refrigeration:
  - Maintains refrigeration after the centrifugation process.
  - Freezing program with rotating rotor and selectable temperature.
  - Guarantees 4 °C at maximum revolutions per minute.
  - Temperature range from -20 °C (-4 °F) to 40 °C (104 °F) in 1 °C/1 °F increments. Programmable in °C or °F.
  - Temperature sensor in the chamber.
  - Gas R 449A HFO (CFC-free).
- EU directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
- Regulation No: (EC) 1005/2009, (EU) 517/2014.
- Standards: EN 61010-1, EN 61010-2-101, EN 61010-2-020, EN 61326-2-6, EN 61326-1.

Centrifuges – Rotor – ORTHOALRESA

More information: on the manufacturer's website or send us an inquiry!

Manufacturer	ORTOALRESA Alvarez Redondo SA
Rotor RT 277	Angle – rotary Capacity max. – 4 × 750 ml RPM max. – 3700 RCF max. – 3122 Radius – 204mm Adapters: microtubes – 72 × 1.5-2.0 ml; 72 × 0.5-0.6 ml; 72 × 0.2-0.4 ml tubes – 4 × 750 ml; 4 × 500 ml; 4 × 250 ml; 4 × 100 ml; 8 × 80 ml; 16 × 50 ml; 24 × 30 ml; 72 × 15 ml; 100 × 10 ml; 100 × 5 ml conical – 20 × 50 ml; 20 × 25 ml; 52 × 15 ml blood samples – 32 × 15 ml; 72 × 10 ml; 72 × 7/10 ml; 72 × 5 ml microtiter – 12/8/4
Rotor RT 278	Angle – rotary Capacity max. – 4 × 250 ml RPM max. – 4200 RCF max. – 3984 Radius – 202mm Adapters: microtubes – 24 × 1.5-2.0 ml; 24 × 0.5-0.6 ml; 24 × 0.2-0.4 ml tubes – 4 × 250 ml; 4 × 100 ml; 4 × 80 ml; 4 × 50 ml; 12 × 30 ml; 28 × 15 ml; 40 × 10 ml; 40 × 5 ml conical – 4 × 50 ml; 4 × 25 ml; 20 × 15 ml blood samples – 28 × 15 ml; 28 × 10 ml; 28 × 7/10 ml; 28 × 5 ml
Rotor RT 279	Angle – rotary Capacity max. – 104 × 5 ml RPM max. – 3800 RCF max. – 2583 Radius – 160mm Adapters: tubes – 104 × 10 ml; 104 × 5 ml blood samples – 104 × 7/10 ml; 104 × 5 ml
Rotor RT 280	Angle – fixed 45º Capacity max. – 8 × 50 ml RPM max. – 6000 RCF max. – 5997 Radius – 149mm Adapters: microtubes – 24 × 1.5-2.0 ml; 24 × 0.5-0.6 ml; 24 × 0.2-0.4 ml tubes – 8 × 50 ml; 8 × 30 ml; 8 × 15 ml; 24 × 10 ml; 24 × 5 ml conical – 8 × 50 ml; 8 × 25 ml; 8 × 15 ml blood samples – 8 × 15 ml; 8 × 10 ml; 8 × 7/10 ml; 8 × 5 ml
Rotor RT 281	Angle – fixed 45º Capacity max. – 4 × 100 ml RPM max. – 5600 RCF max. – 4838 Radius – 138mm Adapters: microtubes – 20 × 1.5-2.0 ml; 20 × 0.5-0.6 ml; 20 × 0.2-0.4 ml tubes – 4 × 100 ml; 4 × 80 ml; 4 × 50 ml; 4 × 30 ml; 16 × 15 ml; 20 × 10 ml; 20 × 5 ml conical – 4 × 50 ml; 4 × 25 ml; 4 × 15 ml blood samples – 16 × 10 ml; 20 × 7/10 ml; 20 × 5 ml
Rotor RT 282	Angle – fixed 30º Capacity max. – 4 × 250 ml RPM max. – 4700 RCF max. – 3779 Radius – 153mm Adapters: microtubes – 24 × 1.5-2.0 ml; 24 × 0.5-0.6 ml; 24 × 0.2-0.4 ml tubes – 4 × 250 ml; 4 × 200 ml; 4 × 100 ml; 4 × 80 ml; 4 × 50 ml; 12 × 30 ml; 28 × 15 ml; 40 × 10 ml; 40 × 5 ml conical – 4 × 50 ml; 4 × 25 ml; 4 × 15 ml blood samples – 28 × 15 ml; 28 × 10 ml; 28 × 7/10 ml; 28 × 5 ml
Rotor RT 283	Angle – rotary Capacity max. – 4 × 750 ml RPM max. – 3700 RCF max. – 3122 Radius – 204mm Adapters: microtubes – 72 × 1.5-2.0 ml; 72 × 0.5-0.6 ml; 72 × 0.2-0.4 ml tubes – 4 × 750 ml; 4 × 500 ml; 4 × 250 ml; 4 × 100 ml; 8 × 80 ml; 16 × 50 ml; 24 × 30 ml; 72 × 15 ml; 100 × 10 ml; 100 × 5 ml conical – 20 × 50 ml; 20 × 25 ml; 52 × 15 ml blood samples – 32 × 15 ml; 72 × 10 ml; 72 × 7/10 ml; 72 × 5 ml microtiter – 12/8/4
Rotor RT 284	Angle – rotary Capacity max. – 144 × 1.5-2.0 ml RPM max. – 4500 RCF max. – 3758 Radius – 166mm Adapters: microtubes – 144 × 1.5-2.0 ml; 144 × 0.5-0.6 ml; 144 × 0.2-0.4 ml microtiter – 12/8/4
Rotor RT 287	Angle – fixed 30º Capacity max. – 30 × 1.5-2.0 ml RPM max. – 14300 RCF max. – 21948 Radius – 96mm Adapters: microtubes – 30 × 1.5-2.0 ml; 30 × 0.5-0.6 ml; 30 × 0.2-0.4 ml
Rotor RT 297	Angle – rotary Capacity max. – 72 × 1.5-2.0 ml RPM max. – 4500 RCF max. – 3758 Radius – 166mm Adapters: microtubes – 72 × 1.5-2.0 ml; 72 × 0.5-0.6 ml; 72 × 0.2-0.4 ml microtiter – 10/6/2
Rotor RT 299	Angle – rotary Capacity max. – 4 × 250 ml RPM max. – 2500 RCF max. – 1481 Radius – 212mm Adapters: microtubes – 36 × 1.5-2.0 ml; 36 × 0.5-0.6 ml; 36 × 0.2-0.4 ml tubes – 6 × 250 ml; 6 × 100 ml; 6 × 80 ml; 6 × 50 ml; 18 × 30 ml; 42 × 15 ml; 60 × 10 ml; 60 × 5 ml conical – 6 × 50 ml; 6 × 25 ml; 30 × 15 ml blood samples – 42 × 15 ml; 42 × 10 ml; 28 × 7/10 ml; 42 × 5 ml
Power supply	230V @ 50Hz
Product dimensions (length × depth × height)	0.720 × 0.780 × 0.400 m
Product weight (net)	113kg