Laminar Flow Cabinet BioAir Aura Mini Laminar Flow Cabinet

„BioAir SpA Aura Mini laminar flow hood

• Technical Specifications:
  • Compact, vertical laminar airflow cabinet.
  • The reduced size allows for easy installation in small or crowded laboratories.
  • Easily convert between internal or external barrier operating modes.
  • The front and side panels are made of tempered glass.
  • H14 photo filter.
  • Filtrete® exhaust filter (or front filters depending on configuration).
  • Active PCR version.
  • Quiet operation, not exceeding 65dB(A).
• AURA Mini Cabinets are available in one compact size (895mm).
• These modern compact photo cabinets provide an excellent cleanroom class 100 workspace, achieving the highest product safety.
• The internal design, airflow aerodynamics, special H14 filter and Filtrete® exhaust filter (or pre-filters) guarantee the highest results, meeting the strictest safety levels and operator comfort.
• Two operating modes: internal air barrier and external air barrier.
• Internal air barrier: The air barrier flows through the front opening and is recirculated with the exhaust air flow via a motor blower. The 70% air is returned to the work area via a primary HEPA filter, while the 30% is exhausted to the environment via a Filtrete® exhaust filter with a 99% gravimetric efficiency on 3μm particles. This configuration provides an excellent level of product protection and excellent insulation.
• External air barrier: The air barrier is absorbed by the Filtrete® front filter, mixed with the incoming recirculating air and then filtered through the main HEPA filter into the workspace: here the 30% exhausts air through the front opening and the 70% recirculates. This configuration provides the highest level of product protection.
• In an environmental configuration, this device can easily be used as an „active PCR” booth, blocking DNS forwarding.
• AURA Mini is a compact and user-friendly tool for protecting highly sensitive products, which can only be provided by experienced European design with over 35 years of experience and precision manufacturing.
• Main Specifications:
  • Centrifugal motor blower with digital inverter for optimal performance.
  • Soft keys on the control panel allow you to control the fan and lighting.
  • Elapsed time meter.
  • Exhaust filter.
  • Removable hardened work surface and work chamber rear wall made of AISI 304 stainless steel.
  • The outer surface parts of the cabinet are made of cold-rolled steel with a coating.
  • Front and side panels made of tempered glass, 5 mm thick.
  • H14 class high efficiency particulate air filters with 99.995% efficiency on 0.1-0.2 micron particles (MPPS) (EN1822-1).
  • Exhaust filter (or pre-filter) type Filtrete® with gravimetric efficiency higher than 99% on 3μm particles.
  • Standard features include: fluorescent light, elapsed time meter.
  • Additional lid with UV light (including a safety switch that allows you to turn off the UV if the lid is removed from the cabinet).
  • Electrical equipment complies with international standards and EMC directives.
  • Soft keys on the control panel allow you to control lighting, fan, and UV light.
  • Lighting › 800 lux.
  • Quiet and peaceful operation <65dB(A) due to very low-vibration fan suspensions.
  • CE mark.

Laminar flow cabinets – BioAir laboratory furniture group

More information: on the manufacturer's website or send us an inquiry!