Refrigerated Centrifuge ORTOALRESA Bioprocen 22 R Refrigerated Centrifuge

We offer a wide selection of devices from the Spanish manufacturer "ORTOALRESA Alvarez Redondo SA", whose company is focused on continuous improvement of product and process efficiency, aiming to offer the best technological solutions to the medical, technical-scientific research and industrial sectors in general.

Categories:General laboratory equipment, Centrifuges, Laboratory equipment

Description
Additional information

"ORTOALRESA Alvarez Redondo SA" Bioprocen 22 R refrigerated centrifuge

Bioprocen 22 R Centrifuge Bioprocesses require a versatile centrifuge that can accommodate a variety of assays and therefore different configurations in the same centrifuge. The Bioprocen 22 R centrifuge has high-speed rotors for microtubes from 1.5 to 5 ml, as well as for 50 ml conical tubes. Its microplate accessories allow for the use of rotating rotors. The refrigeration system is designed for temperature stability, allowing it to be maintained even at high speeds and over time. Different options, customizable via software, make this centrifuge the right tool for your laboratory. Increase your laboratory performance with the new Bioprocen 22 R.
- Features:
  - Screen:
    - Displays revolutions per minute and relative centrifugal force (RPM/RCF), time, temperature and acceleration/deceleration (PCBS) mode.
    - Speed programming in 10 RPM/10 xg steps.
    - Counting up/down from “0” or “set RPM/RCF” for reproducible tests.
    - Timer from 5 s to 99 min., programmable in 5 s increments and fixed position.
    - PCBS: Progressive controlled braking system with up to 175 selectable steps that prevents sample homogenization after separation.
    - 16 programmable memory locations.
    - Several acoustic and visual messages on the screen indicate the device status to the user.
  - Easy to use:
    - Microprocessor controlled.
    - Brushless, maintenance-free induction motor.
    - Rotor list in memory.
    - Noise level: less than 60 dB.
    - Start, stop, lid open and short spin buttons with adjustable speed.
    - Ability to lock or change speed during a cycle.
    - Low height for easy access.
    - The last values remain in memory.
    - Automatic rotor recognition. Overspeed protection.
  - Safety:
    - Cover with safety systems:
      - Automatic lid locking system, motorized, with double lock.
      - Emergency lid unlock release.
      - Locking and protection against opening along the launch.
      - Lid fall protection.
      - Flexible in the lid for calibration and operation verification.
    - Ergonomic design that allows easy closing of the lid.
    - Unbalance detection and shutdown.
    - Safety ring for protection between the centrifugation chamber and the housing.
    - Centrifugation chambers made of stainless steel (easy to clean).
    - The rotors can be removed by closing the lid. Hermeline lids.
    - Rotors and adapters are autoclavable and easy to install by the user.
    - Automatic power-saving shut-off for up to 8 hours with the option to turn it off.
  - Refrigeration:
    - Maintains refrigeration after the centrifugation process.
    - Cooling program with rotating rotor and selectable temperature.
    - Guarantees 4 °C for maximum rotation speed.
    - Temperature range from -20 °C (-4 °F) to 40 °C (104 °F) in 1 °C increments.
    - Temperature sensor in the chamber.
    - Gas R 449A HFO (CFC-free).
- EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
- Regulation No.: (EC) 1005/2009, (EU) 517/2014.
- Standards: EN 61010-1, EN 61010-2-101, EN 61010-2-020, EN 61326-2-6, EN 61326-1.

Centrifuges – Rotor – ORTHOALRESA

More information: on the manufacturer's website or send us an inquiry!

Manufacturer	ORTOALRESA Alvarez Redondo SA
Rotor RT 274	Angle – fixed 28º Capacity max. – 6 × 50 ml RPM max. – 8300 RCF max. – 7778 Radius – 101mm Adapters: tubes – 6 × 50 ml; 6 × 30 ml; 6 × 15 ml; 6 × 10 ml; 6 × 5 ml microtubes – 18 × 1.5-2.0 ml; 18 × 0.5-0.6 ml; 18 × 0.2-0.4 ml blood samples – 6 × 10 ml; 6 × 7-10 ml; 6 × 5 ml conical tubes – 6 × 50 ml; 6 × 30 ml; 6 × 15 ml
Rotor RT 275	Angle – fixed 45º Capacity max. – 30 × 1.5-2.0 ml RPM max. -15000 RCF max. – 24148 Radius – 96mm Adapters: microtubes – 30 × 1.5-2.0 ml; 30 × 0.5-0.6 ml; 30 × 0.2-0.4 ml
Rotor RT 276	Angle – fixed 30º Capacity max. – 4/2 microtiter RPM max. – 4500 RCF max. – 1947 Radius – 86mm Adapters: microtubes – 72 × 1.5-2.0 ml; 72 × 0.5-0.6 ml; 72 × 0.2-0.4 ml microtiter – 4/2
Rotor RT 291	Angle – fixed 45º Capacity max. – 12 × 5 ml RPM max. – 18100 RCF max. – 31865 Radius – 87mm Adapters: microtubes – 12 × 1.5-2.0 ml; 12 × 0.5-0.6 ml; 12 × 0.2-0.4 ml conical tubes – 12 × 5 ml; 6 × 5 ml (with screw caps) cryotubes – 12 × 5 ml
Rotor RT 306	Angle – fixed 45º Capacity max. – 32 × 0.2 ml RPM max. – 18100 RCF max. – 20145 Radius – 55mm Adapters: microtubes – 32 × 0.2 ml
Rotor RT 307	Angle – fixed 45º Capacity max. – 24 × 1.5 ml RPM max. -18100 RCF max. – 30034 Radius – 82mm Adapters: microtubes – 24 × 1.5-2.0 ml; 24 × 0.5-0.6 ml; 24 × 0.2-0.4 ml
Rotor RT 308	Angle – fixed 45º Capacity max. – 48 × 1.5-2.0 ml RPM max. – 14500 RCF max. – 22330/19274 Radius – 95mm Adapters: microtubes – 48 × 1.5-2.0 ml; 48 × 0.5-0.6 ml; 48 × 0.2-0.4 ml
Power supply	230V @ 50Hz
Product dimensions (length × depth × height)	0.410 × 0.690 × 0.320 m
Product weight (net)	59kg