Centrifuge ORTOALRESA Biocen 22 Centrifuge

We offer a wide selection of devices from the Spanish manufacturer "ORTOALRESA Alvarez Redondo SA", whose company is focused on continuous improvement of product and process efficiency, aiming to offer the best technological solutions to the medical, technical-scientific research and industrial sectors in general.

Categories:General laboratory equipment, Centrifuges, Laboratory equipment

Description
Additional information

"ORTOALRESA Alvarez Redondo SA" Biocen 22 centrifuge

Biocen 22 Centrifuge
The Biocen 22 is our offer for users looking for a microcentrifuge with potential applications for microhematocrit and microtubes. Its small size, good performance and high versatility make it an indispensable tool. It gives the user full control from the start of the process, and many values can be adapted to the processes. Designed to ensure minimal temperature rise in the chamber due to the high-speed process.
- Features:
  - Screen:
    - Displays revolutions per minute and relative centrifugal force (RPM/RCF), time.
    - Speed programming in 50 RPM/10 xg steps.
    - Counting up/down from “0” or “set RPM/RCF” for reproducible tests.
    - Timer from 1 to 99 minutes, programmable in 1 minute increments and fixed position.
    - Deceleration control in 3 levels: fast, soft and free.
    - Acoustic and visual messages on the screen indicate the device status to the user.
  - Easy to use:
    - Microprocessor controlled.
    - Brushless, maintenance-free induction motor.
    - Rotor list in memory.
    - Noise level: less than 60 dB.
    - Start, stop, lid open and short spin buttons with adjustable speed.
    - Ability to lock or change speed during a cycle.
    - Automatic lid opening, programmable.
    - Low height for easy access.
    - The last values remain in memory.
    - Overspeed protection.
  - Safety:
    - Cover with safety systems:
      - Automatic lid locking system, motorized.
      - Emergency lid unlock release.
      - Locking and protection against opening along the launch.
      - Lid fall protection.
      - Hinge in the lid for calibration and operation verification.
    - Disapproval detection and suppression.
    - Protective safety strip between the centrifugation chamber and the housing.
    - Centrifugation chamber made of stainless steel (easy to clean).
    - Rotors can be removed with the lid closed. Hermel caps.
    - Rotors and adapters are autoclavable, easy to install by the user.
    - Forced ventilation to reduce temperature rise.
    - Automatic power-saving shutdown for up to 8 hours, with the option to turn it off.
- EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
- Standards: EN 61010-1, EN 61010-2-101, EN 61010-2-020, EN 61326-2-6, EN 61326-1.

Centrifuges – Rotor – ORTHOALRESA

More information: on the manufacturer's website or send us an inquiry!

Manufacturer	ORTOALRESA Alvarez Redondo SA
Rotor RT 227	Angle – fixed 45º Capacity max. – 24 × 1.5-2.0 ml RPM max. – 15000 RCF max. – 20627 Radius – 82mm Adapters: microtubes – 24 × 1.5-2.0 ml; 24 × 0.5-0.6 ml; 24 × 0.2-0.4 ml
Rotor RT 228	Angle – fixed 0º Capacity max. – 24 × 1.5 × 75 mm RPM max. – 15000 RCF max. – 21885 Radius – 87mm Adapters: capillaries – 24 × 1.5 × 75 ml; 8 × 5 mm
Rotor RT 229	Angle – fixed 45º Capacity max. – 32 × 0.2 ml RPM max. – 15000 RCF max. – 13835 Radius – 55mm Adapters: microtubes – 32 × 0.2 ml
Rotor RT 254	Angle – fixed 45º Capacity max. – 12 × 5 ml RPM max. – 15000 RCF max. -21884 Radius – 87mm Adapters: microtubes – 12 × 1.5-2.0 ml; 12 × 0.5-0.6 ml; 12 × 0.2-0.4 ml conical tubes – 12 × 5 ml; 6 × 5 ml (with screw caps)
Power supply	230V @ 50Hz
Product dimensions (length × depth × height)	0.270 × 0.380 × 0.270 m
Product weight (net)	16kg